Important hint:

Please note, that the SNMP agents for RAID controllers are not included in the installation packages of the ServerView agents for Windows or LINUX.
The SNMP agents are included in the Server software packages for the RAID controllers.

Examples:
Adaptec: SNMP agents for Windows are included in the ASMBE package.
LSI: SNMP agents for Windows are included in the GAM server package.
Mylex: SNMP agents for Windows are included in the GAM server package.
PROMISE: SNMP agents for Windows are included in the FastTrak utility package.

GAM SW-Kit:
GAM SW-Kit V6.02-20 (or higher version, e.g. V6.02-32-01) is required in order for ServerView to display RAID information correctly.
For PRIMERGY Server with LSI SAS controller the SW-Kit 7.00-26-00 (or higher version) is required.
SW-Kit 7.00-26-00 is included in the PRIMERGY Support Package LSI_MegaRAID_GAM V1.15.02.
SW-Kit 7.00-26-00 requires ServerView S2 V4.20.18 or higher.

ServerView RAID Manager:
ServerView RAID Manager is designed by Fujitsu to offer a vendor independent RAID management and monitoring solution. For more details see ServerView RAID Manager.

Detailed information:
For more detailed information please look at the manuals for the specific SW-package you need. The manuals can be found on https://support.ts.fujitsu.com/.

Exception:
In case you perform an initial Windows installation of your PRIMERGY server with ServerView Installation Manager (ServerStart), the SNMP agents for the RAID subsystem are installed automatically.