COMMENT_PUBLIC
--------------
Content of UMEiRMC ISO data Version 15.23.10.00:
- Update Manager Express 9.64.00
- UME LinuxLife 12.05.00
Functionality
- Support of embedded Lifecycle Management > Offline Update
- Support for Simple Update
Target Server:
PQ3800B
PQ3800B2
PRIMERGY BX2580M2
PRIMERGY BX2560M2
PRIMERGY CX2550M2
PRIMERGY CX2570M2
PRIMERGY CX2550M4
PRIMERGY CX2560M4
PRIMERGY CX2570M4
PRIMERGY CX2550M5
PRIMERGY CX2560M5
PRIMERGY CX2570M5
PRIMERGY CX2550M6
PRIMERGY CX2560M6
PRIMERGY RX1330M2
PRIMERGY RX2510M2
PRIMERGY RX2530M2
PRIMERGY RX2540M2
PRIMERGY RX2560M2
PRIMERGY RX4770M2
PRIMERGY RX1330M3
PRIMERGY RX4770M3
PRIMERGY RX1330M4
PRIMERGY RX2520M4
PRIMERGY RX2530M4
PRIMERGY RX2540M4
PRIMERGY RX4770M4
PRIMERGY RX2520M5
PRIMERGY RX2540M5
PRIMERGY RX2530M5
PRIMERGY RX4770M5
PRIMERGY RX2530M6
PRIMERGY RX2540M6
PRIMERGY RX4770M6
PRIMERGY TX1320M2
PRIMERGY TX1330M2
PRIMERGY TX2560M2
PRIMERGY TX1310M3
PRIMERGY TX1320M3
PRIMERGY TX1330M3
PRIMERGY TX1320M4
PRIMERGY TX1330M4
PRIMERGY TX2550M4
PRIMERGY TX2550M5
PRIMERGY CX1640M1
PRIMERGY RX2520M1
PRIMERGY RX2530M1
PRIMERGY RX2540M1
PRIMERGY TX2540M1
PRIMERGY TX1320M1
Requirements:
- embedded Lifecycle Management must be enabled
- SD-card in Server
- For eLCM update
- iRMC S5 FW >= 3.39P
- For Simple Update
- iRMC S5 FW >= 3.39P
- The ASP for the target component must support Simple Update
Please see ?Installation description? of each ASP
Restrictions:
- Supported is update iRMC on RX4770M6-A1  with board without PFR (board A1)
- BIOS downgrades (Dedicate offline update) is not supported for M5 systems
- As of 19.10, there are is only one BIOS and iRMC ASP with an F70 for
TX1320M4, TX1330M4 and RX1330M4 therefore no update is needed for those
servers.
- Similarly, as of 19.10 there are only one BIOS ASP that supports Deskflash
for Mehlow systems. It is therefore not possible to perform a BIOS update
for Mehlow systems.
- For offline update of machines with two BIOS versions available please use
at least iRMC v.1.08P
- Please remember, that successful update cannot be performed on machines
with debug mother board (for some A1 systems main board is recognized as D1
instead of A1 ? on those machines update will not start)
- PFR model PRIMERGY iRMC update is not supported
- Unable to update M5 BIOS from R1.8.0. Please update BIOS from iRMC WebUI.
- UMEiRMC.tar 15.xx supported by iRMC S5 from version 3.39P.
- For TX1330M4 use at least iRMC v3.49P
- For iRMC S5, please clear SD-card before preparing an Offline Update.
Copyright (C) 2022 Fujitsu Limited
All rights reserved

COMMENT_CRITICAL
----------------------------
Requirements:
- iRMC S4/S5 FW ASP >= 3.39P
- SD-card in Server
- eLCM License Key