| Title: | FLASH BIOS UPDATE DISK (D2151-A) [Flash - BIOS] |
| Version (Date): | 5.00 - 1.07 - A1 (05/08/2005) |
| Size: | 1.31 MB |
| Language: | Supports all languages |
| Filetype: | EXE |
| Comment: | BIOS - Change V5.00 Release R1.07.2151_A1 ==================================================== - Implemented new video bios version 1248. - Add System Monitoring support for Cedar Mill and Presler. - Fixed CMOS Checksum Error if system is reset/switched OFF during ROM scan or at OPROM setup exit in case a bootable, removable drive is detected. - Fix problem that some systems hang if a USB-MO drive with a CD-ROM image is attached. - Specification update for Intel Cedar Mill B-0 Stepping and Dempsey B-1 Stepping. - Include support for the Intel CPU Vanderpool Technology feature. - Improvement for Intrusion Feature: In case Intrusion isn't enabled in BIOS Setup, clear the intrusion status to avoid, that the status remains set until the feature will be enabled later on and report immediately an intrusion. - ACPI: Fixed reporting of UDMA mode in PATA/SATA combined modes. - Improvement: Do not report any PS/2 Mouse and Keyboard resource if no such device is attached during BIOS POST. This prevents the nasty timeout during Windows XP installation if only a USB Keyboard and/or a USB Mouse are attached. - Improvement: Only the owner of the SETUP password may access the ATA vulnerabilities menu. - Bug Fix: UDMA mode was set to slowest P-ATA drive per cable. - Bug Fix: Disable Secondary IDE in device manager if S-ATA Mode is "Native". - Bug Fix: CDROM-Boot didn't work, if a multicard reader was connected. - Bug Fix: Disable USB Controller for runtime,if "USB Enabled Ports" is set to "None" in BIOS Setup. - Added Setup-Node to select support for front panel audio: AC97 or High Definition Audio. ==================================================== History-List: ------------- 04.08.2005 BIOS - Change V5.00 Release R1.06.2151_A1 ==================================================== - Bug Fix for some configuration with 4GB memory. 28.07.2005 BIOS - Change V5.00 Release R1.05.2151_A1 ==================================================== - Bug Fix: If NX Memory Protection Enabled, FirstWare RecoverPro works. - Microcode update for Pentium 4 Processor: Prescott-N/-T F34(D-0 Step) Patch ID 17h Prescott-N/-T F41(E-0 Step) Patch ID 17h Prescott 2M-T F43(N-0 Step) Patch ID 05h Smithfield F44(A-0 Step) Patch ID 06h - Bug Fix: Setup node to set discard timer to 1024 or 128 clocks didn't work on ICH7. - Improved Cache initialization to avoid, that some memory areas are cached twice. - Use new format for LAN FW Revision in BIOS Info Page. - Implemented new video bios version 1227. - Support for USB 2.0 devices under DOS. - Smartcard SystemLock: Integration of generic POST setup popup boxes to enter PIN, to guide the user and to show error messages. Additionally, installation, uninstallation and smartcard administration is now provided on a separate BIOS Setup submenu page called "Smartcard SystemLock". - Bug Fix: SystemLock sporadically reports the error message "ACCESS DENIED" and can't be enabled. - Workaround: Set Heimdall temperature limits register earlier. - SMBIOS memory size support for LAKEPORT added. - SMBIOS memory frequency (speed) support for LAKEPORT added. - Implemented memory reference code 1.10. - Fix incorrect display of DCO freeze lock in setup. - Implemented ICH7 Spec Update 1.3. - Improvement: CPU Information in the BIOS Info Page now shows the CPU Core count. - Reduced power consumption of LAN controller with new LAN firmware. This is in case WOL is disabled or the controller itself is disabled. - Make Power-up and Reset work for Remote Boot RMCP. - Improvement: Turn on L1 cache during very early POST. - ASF Information for reset and power off disabled. - Speeds up ACPI S3 resume time. Removed PS2 keyboard restore except setting the system flag. - Bug Fix: The CPU type text in the Windows device manager was not correctly shown for the 2nd core in Smithfield CPUs. - Correct Bend Value for CPU sensor in Enhanced Mode. - Changed communication with LAN firmware to avoid unexpected behavior of the controller after ACPI S3. The LAN controller wasn't visible after S3, if WOL was disabled in BIOS Setup. - Bug Fix: If an "AC fail" did occur during ACPI S3, the system did hang during the next boot. This bug occurs only, if AC Fail Recovery is set to "Always Off". 17.06.2005 BIOS - Change V5.00 Release R1.04.2151_A1 ==================================================== - Not officially released. 31.05.2005 BIOS - Change V5.00 Release R1.03.2151_A1 ==================================================== - Not officially released. 11.05.2005 BIOS - Change V5.00 Release R1.02.2151_A1 ==================================================== - Not officially released. 26.04.2005 BIOS - Change V5.00 Release R1.01.2151_A1 ==================================================== - Bug fix in MBI Interface which is used by Intel graphic driver. We didn't report the graphics core frequency correctly. - Bug fix for some incorrect HDD firmware (Maxtor). - Bug fix: TPM wasn't activated by BIOS after setting TPM to enable. - Bug fix: System made reboots during Windows XP boot if the TPM License bit was set. - Total redesign of LAN enable/disable mechanism to fix problems with TPM. - Added SATA II support. - Add improvements in HDD security. Make HDD’s less vulnerable to malware runtime attacks. Add an option to force a freeze lock after S3. - Implemented new video bios version 1217. - System Monitoring bug fix: Some values (HDD sensor, fan vault/down/up -speed, hysteresis) are now set up correct. - Implemented new System Monitoring values. - Add new Intel Inside Logo for Pentium D CPU. - If "USB at Power-off" is set to "Always Off", grey setup node "USB Keyboard" in menu "Power-on Source" and set it to disabled. 15.04.2005 BIOS - Change V5.00 Release R1.00.2151_A1 ==================================================== - First released version. |
| Categorie: | Systemboard |
| Operating System: | No Operating System Dependencies |
| Products: | Systemboard D2151-A1x Personal Computer ESPRIMO P5905, i945G |
| Open Webpage: | http://support.ts.fujitsu.com/indexdownload.asp?Softwareguid=86a7f8c8-5fd4-43d2-ae04-577ee718a538 |