| Comment: | *******************************************
* *
* BIOS Flash-update for Fujitsu Siemens *
* AMILO Pro V2000 *
* FSP: 811002266, 10600398508 *
* *
*******************************************
After running PB2I-S0Z.EXE the floppy disk should contain following files:
flash.bat
phlash16.exe
B2I-S0Z.WPH
readme.txt (this file)
readme.bat
To flash your BIOS boot in DOS-mode and run flash.bat from the floppy disk.
!! Connect AC adapter before flashing !!
!Please reboot your system after flashing!
current BIOS R01-S0Z:
Solved problems:
- Optical drives which are flashed as secondary slave will now also be
supported
with this new BIOS version.
Known errors, problems and restrictions:
- none
Addititonal information:
- After finishing BIOS flash under DOS or OS environment an automatic reboot
will be executed.
________________________________________________________________________________
_
predecessor BIOS R01-S0Y:
Solved problems:
- none
Known errors, problems and restrictions:
- none
Addititonal information:
- If the switch “Default wireless device” is enabled in the BIOS settings,
the WLAN is switched on during boot up.
________________________________________________________________________________
_
predecessor BIOS R01-S0V:
Solved problems:
- none
Known errors, problems and restrictions:
- none
Addititonal information:
- New panel ID into BIOS added to support new 15"XGA panel.
________________________________________________________________________________
_
predecessor BIOS R01-S0U:
Solved problems:
- none
Known errors, problems and restrictions:
- none
Addititonal information:
- Support for Intel 1,5 GHz Banias CPU added.
Due to thermal junction the fan will start sooner.
- Bios flash via windows platform is also available (W-S0U.EXE)
________________________________________________________________________________
_____________________
predecessor BIOS R01-S0R:
Solved Problems:
- The incorrect LED function with the Intel WLAN 2200bg module is now fixed with
this BIOS version.
Known Problems:
- none
Additional Information:
- After flashing the BIOS by WinFlash no automatic reboot is available.
- Support for Intel Celeron M processor added.
- Video BIOS update to v28944 and support for new panel ID for Hitachi 15”
LCD 15"XGA TX38D81VC1CAB REV.B added.
- Support for FSC password feature.
1.) ONLY the Supervisor shall be allowed to set HDD password.
=> HDD password item will be greyed out if the BIOS Setup was entered
using the User password.
2.) ONLY the Supervisor shall be allowed to remove HDD password.
a) Before setting HDD password, the Supervisor password must be set.
=> HDD password item will be grey if the Supervisor password is not set.
=> HDD password item will become active the supervisor password has
been set.
b) Before clearing the Supervisor password, the supervisor MUST clear HDD
password.
=> Supervisor password will be gray (can't be changed or cleared ) if
HDD password exist.
3.) Supervisor password will become active if no HDD exist or no there is no
HDD password.
Note: How to skip HDD password entry on boot message at startup!
1.) Supervisor login: The supervisor password and the HDD password should be
the same!
Bios settings: Supervisor password should be set and password on boot
should be enabled.
2.) User login: The user password and the HDD password should be the same!
Bios settings: Supervisor and User password should be set and password on
boot should be enabled.
________________________________________________________________________________
_____________________
predecessor BIOS R01-S0O:
Solved Problems:
- none
Known Problems:
- none
Additional Information:
- Support for Intel Celeron M processor added.
- Video BIOS update to v28944 and support for new panel ID for Hitachi 15”
LCD 15"XGA TX38D81VC1CAB REV.B added.
- Support for FSC password feature.
1.) ONLY the Supervisor shall be allowed to set HDD password.
=> HDD password item will be greyed out if the BIOS Setup was entered
using the User password.
2.) ONLY the Supervisor shall be allowed to remove HDD password.
a) Before setting HDD password, the Supervisor password must be set.
=> HDD password item will be grey if the Supervisor password is not set.
=> HDD password item will become active the supervisor password has
been set.
b) Before clearing the Supervisor password, the supervisor MUST clear HDD
password.
=> Supervisor password will be gray (can't be changed or cleared ) if
HDD password exist.
3.) Supervisor password will become active if no HDD exist or no there is no
HDD password.
Note: How to skip HDD password entry on boot message at startup!
1.) Supervisor login: The supervisor password and the HDD password should be
the same!
Bios settings: Supervisor password should be set and password on boot
should be enabled.
2.) User login: The user password and the HDD password should be the same!
Bios settings: Supervisor and User password should be set and password on
boot should be enabled.
________________________________________________________________________________
_____________________
predecessor BIOS R01-S0N:
Solved Problems:
- none
Known Problems:
- none
Additional Information:
- Video BIOS update to v28944 and support for new panel ID for Hitachi 15”
LCD 15"XGA TX38D81VC1CAB REV.B added.
- Support for FSC password feature.
1.) ONLY the Supervisor shall be allowed to set HDD password.
=> HDD password item will be greyed out if the BIOS Setup was entered
using the User password.
2.) ONLY the Supervisor shall be allowed to remove HDD password.
a) Before setting HDD password, the Supervisor password must be set.
=> HDD password item will be grey if the Supervisor password is not set.
=> HDD password item will become active the supervisor password has
been set.
b) Before clearing the Supervisor password, the supervisor MUST clear HDD
password.
=> Supervisor password will be gray (can't be changed or cleared ) if
HDD password exist.
3.) Supervisor password will become active if no HDD exist or no there is no
HDD password.
Note: How to skip HDD password entry on boot message at startup!
1.) Supervisor login: The supervisor password and the HDD password should be
the same!
Bios settings: Supervisor password should be set and password on boot
should be enabled.
2.) User login: The user password and the HDD password should be the same!
Bios settings: Supervisor and User password should be set and password on
boot should be enabled.
- This is an initial BIOS! |